New Tri-Pac installed...

I have a old tri pac,so not familiar with the new. I'd check the idle speed and exhaust. The idle speed on mine was jacked up,instead of taking it to the dealer I just looked at a couple other units and counted threads on the idle screw. It was five rounds too far in.

 

You'll get used to it, in a few weeks ya won't even notice it most of the time.
Its going to kick on a lot though, the battery monitor is set at 12.8 usually( factory set) I hooked up my laptop and changed my to 12.0. I tried 11.5 but I would lose my interior lights before it kicked on , lol.
As far as idle speed you actually want it set a little high for when the a.c. kicks in.
When I went in for my first service it was one of the first things the tech checked. Mine needed to be turned up about 500rpm.
Yes mine is a new evaluation. 2017.

 

By the way you'll want keep ya some 20amp fuses ( orange) there's two in the panel the top one is the one that blows. Probably won't have to worry about till summer and you start using the a.c. .
They think the issue is in the condenser fan. I had mine replaced ( warranty) in the first month. But it still blows once in awhile.

 

I have heard new APUs have DPF and must be changed after 2-3 k miles. is it true? what is the cost ?

 

I was in Thermo king dealer in California few weeks a go. The salesman told me that new units have dpf factory installed and must be cleaned/changed in certain period. Same think was told at Carrier dealer. After long thinking I bought 2008 model year Carrier with 2000-3000 hours on it without DPF.

 

he said about $1400