No start after engine wash ‘07 Volvo VNL D12

Discussion in 'Volvo Forum' started by WandaB, Sep 25, 2021.

  1. WandaB

    WandaB Bobtail Member

    1
    0
    Sep 15, 2017
    0
    I got a truck/ engine wash over a week ago at Blue Beacon. Immediately it was a hard start. It ran with no problem. I made it home and came out later to start the truck and no luck. I was told to try it again after 12 hours to give whatever time to dry out. It’s been over a week and still won’t turn over. I had it towed to a shop and they can’t find the problem.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. lilillill

    lilillill Sarcasm... it's not just for breakfast

    5,210
    10,317
    Nov 7, 2007
    Possum Booger, Alabama
    0
    Unplug the ECM connectors and use a blow gun to clear out any water. Then spray the connectors with some silicone spray (not WD40, PB blaster, etc).

    Plug them back in and it should run.
     
    Bean Jr. Thanks this.
  4. nasriza

    nasriza Road Train Member

    2,120
    1,710
    Feb 1, 2013
    Chicago, IL
    0
    Check to see if yoiu still can communicate with different modules on dash like engine ecu and such do you have a crank no start or no crank no start.
     
    baha and Bean Jr. Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted