Omnitracs and teams

You should ask your company because Qualcom has a bunch of features that can be changed so maybe they have something different than another person.

 

One device. You both log in and select active driver. When you switch drivers the other driver goes active normally by putting there password in. Once that happens, your line 3 will be unclickable not allowing you to log drive time. Other drivers will go from grey to normal allowing them to log drive time. Then you just go back and forth

 

If everybody concerned has an Omnitracs account (user id) at the same carrier then you should both log in/out as appropriate on the single unit that is in the truck. (Assuming the truck and it's Omnitracs system is paired to the same carrier).

if we're talking about a "rental truck" then more information is needed or things need to be properly set up beforehand.

If this is not the case then I guess you can do whatever makes sense.

 

Are you asking how to run team's with the Qualcomm?

The codriver will login and it will track their hours. To change drivers, go into the login screen and the person that will be driving taps the change button to become the new active driver. Obviously you can only have one active driver at a time. Make sure the other person logs sleeper in 2 hours unless they are doing on duty work.

 

one logs in as active driver and the other one as inactive driver....