outside temperature senor on 2013 Columbia

Discussion in 'Freightliner Forum' started by terryt, Dec 10, 2013.

  1. terryt

    terryt Heavy Load Member

    736
    777
    Apr 27, 2009
    0
    My outside temp gauge is not working it reads -58 all the time and it stay's on (light) after you turn the truck off. Stopped at the dealer today and no one could find the outside senor. It is not behind the bumper 2 mechanics and service manager could not find it. Have a call into Freightliner to help find it. Does any one have any ideal where it is? It a Fitzgerald glider kit.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. CondoCruiser

    CondoCruiser The Legend

    19,726
    18,734
    Apr 18, 2010
    Tennessee
    0
    I'm not sure about your year but Freightliners use to put them on the pipe from the air cleaner to the turbo. They were famous for the wires breaking at the little crimps on the connector to the sensor. Surely they fixed that problem by now?

    Your truck is under warranty. Get the dealer to fix it.
     
  4. Chip S

    Chip S Light Load Member

    200
    104
    May 27, 2013
    Texas
    0
    Should be on the left side behind the bumper. What is the last 6 of the VIN?

    Sometimes they hide them in odd spots
     
  5. terryt

    terryt Heavy Load Member

    736
    777
    Apr 27, 2009
    0
    I understand it under warranty they could not find the senor just thought some one might know on this forum. ok? The last six are of the vin. are ff2688 it does not show a part number for the senor when they ran the vin number. This is why the call to FL
     
  6. Chip S

    Chip S Light Load Member

    200
    104
    May 27, 2013
    Texas
    0
    Your'e right. Your truck doesnt call out having an outside air temp sensor. The truck does show to have the harness installed. It is a 2 pin connector behind the left of the bumper, tied into the chassis harness. Check closely for the connector near your fog/road lights. With wires 299 and 299A

    If you find the connector, you can buy part number 22-43953-000
     
  7. terryt

    terryt Heavy Load Member

    736
    777
    Apr 27, 2009
    0
    Well I found out why there is no outside temperature senor because it hard wired to the gauge. I took the dash apart followed the wire out the steering column it goes behind the washer bottle where some one cut the wire and the senor was gone. There is no senor like the ones used on older trucks. bad senor means new gauge.
     
  8. Cowpie1

    Cowpie1 Road Train Member

    5,569
    4,651
    Nov 25, 2008
    Kellogg, IA
    0
    I have a 2013 glider and I haven't ever looked for the sensor, but it has to be on the firewall or somewhere inside the hood. Mine is spot on, but when I stop, the temp will rise from the engine heat. Once I get moving, it drops back down. Mine was ordered from the factory with the gauge, so it was not a retrofit.
     
  9. terryt

    terryt Heavy Load Member

    736
    777
    Apr 27, 2009
    0
    This to is a factory gauge. Got a new one ordered today 89 dollars you need this gauge to work or your a/c will not work according to the people at Freightliner dealership this is my first Freightliner so I'm on a new learning curve.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.