Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Pete 379 Electrical Issues

Discussion in 'Peterbilt Forum' started by Drpeterbilt, Jun 15, 2012.

  1. Jun 15, 2012 #1
    Drpeterbilt

    Drpeterbilt Bobtail Member

    3
    0
    Jun 15, 2012
    0
    Hello , New to the site and have some electrical questions on a 379 Pete. Have issues with the passenger headlight..on lowbeam there is no problems, but when you hit the high beams, the right side flickers on and off. Traced the problem to the 10 amp resettable circuit breaker in the fuse panel. My question is How do you remove that circuit breaker for replacement. I found if you tap the button on the breaker , it flickers the lights. Not sure if the center button removes or the whole thing. Any help would be greatly Appreciated. Thanks
     
    Drpeterbilt, Jun 15, 2012
    Drpeterbilt, Jun 15, 2012
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Jun 15, 2012 #2
    truckmechanic

    truckmechanic Medium Load Member

    534
    140
    Jan 14, 2012
    Hi Desert Ca
    0
    Remove the lower dash panel there are two screws at the lower end of the fuse box remove the screws and lift the fuse box up and rotate there will be two flat blade screws that hold wires to the breaker then use needle nose pliers to depress plastic clips to remove circuit breaker and also disconnect the battery the power wire to the breaker is hot all the time
     
    truckmechanic, Jun 15, 2012
    truckmechanic, Jun 15, 2012
    #2
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.