Pneumatic ride height problem

Discussion in 'Tanker, Bulk and Dump Trucking Forum' started by mesas`, Feb 3, 2018.

  1. mesas`

    mesas` Bobtail Member

    1
    0
    Feb 3, 2018
    0
    How you doing, just have a question. We just bought a 2005 Polar Pneumatic, air ride and our discharge hose is 5 inches from the ground. Does anybody have any advice or guidance on how to fix this issue to at least maybe a foot to foot and half? We are new to this industry and thought we had a solid trailer till we saw the ground clearance. We are hauling fly ash. Any help or leads would be great. Thanks!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. baha

    baha Road Train Member

    4,137
    2,836
    Jul 25, 2013
    ga
    0
    Does your trailer have the U shaped axle for the line to go under the axle and give you more room ?
     
    Last edited: Feb 3, 2018
  4. REO6205

    REO6205 Road Train Member

    13,172
    60,500
    Feb 15, 2014
    California.
    0
    Any competent mechanic or trailer shop should be able to replumb that for you.
     
  5. catwrench55

    catwrench55 Light Load Member

    211
    88
    Jan 5, 2015
    0
    Yeah if you want it higher just run a rubber product hose from rear tee over the axles and secure it so it doesn't rub anything. I have the same trailer mine is this way.

    If you mean your product pipe between the tees is that low that is strange. I made spacers to lower the king pin plate which raised the front of the trailer 3 inches to help with load distribution. But didn't have ground clearance issues.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.