Post flatbed load photos here V2.0

I was eyeballing some of their stuff a few weeks ago. They actually had some decent rates for once. Everyone I've talked to that pulled one of their loads has said never again. They dropped the rates back so I lost interest.

Always been curious though, cause a lot of the times when I've heard guys say how bad a shipper or a load is, turns out to not really be so bad.

 

Sorry bud, I came back to work, so you have to figure out which way the little girl is pointing and go opposite.

 

This load pays very well for the miles. The problem is Sams club unloading hours. I’ll be on this load for 2 full days for 380 miles.

 

But at least you’ll get some sleep?

 

Yep, that's been one of the reasons I've not taken one. Seems like the stops are set up so that it takes forever to unload.

 

Didn’t know how it all worked till I was loaded. To late to back out then. Lesson learned.

 

Going to get me some Mexican food and something to drink pretty quick.

 

I consider myself a good backer. This is probably one of the hardest I've had to do, it took me several tries, I got no dump valve hooked up, which didn't help... Corey steel in Cicero, Illinois. Anyone deliver here to the "back door" before? And any window licker that thinks flatbedders dont know how to back up is full of ####. I back into more tight spots with a spread axle flat than I ever did pulling a van or reefer. Guaranteed!!! Pictures don't do justice. Those poles are main issue, obviously no room to full forward either. The door is where the blue truck is...

 

One more.

 

Geez. Sight side or blind side, it's blind either way. Nice skills.