Post flatbed load photos here V2.0

Headed for western Alberta! Approx 92k lbs on the decks.

 

Got to be the loader operator yesterday and today, loading concrete barriers onto our trucks.



Except the pile was made with an excavator and barrier clamp so I had to pull the top row with a chain to get it to the edge so I could unload it.

Had to build me a stairway to get to the top of the barriers.




Let's just say getting down wasn't as easy as getting up. The second time I placed the forks much closer.

edit: made me a stairway

 

Headed home.

 

Job site return from north jers back to home.

BEEP BEEP BEEP BEEP BEEP BEEP

 

Too funny.

 

Take the panel loose, and the beeping will get extremely loud. Shove a little piece of paper towel into that little hole in the alarm speaker and cover it with electrical tape. It should take quite a bit of the decibels out, so you don't fry your brain as quickly.

 

In the meantime she leaked 2.5 gallons of oil today. Dripdripdripdripdrip
Didn't have a leak Til today

Gonna drop her off at my "cheap and takes a long time to get things done" mechanic. Sort out these issues. And drain and remove the drivers side fuel tank to save on weight and waste. See what else I can come up with to keep her out of the plow guys way this snow season.

 

Seen this the other day

 

60k of lumber. Almost forgot to take the photo before I got unloaded.

 

I ain't never been passed, no I ain't never been passed... (Yeah right).

138k gross.

As you can tell by the rims on my truck, it could REALLY use a wash...

Manitoba bound.