Post your flatbed load pictures here

####,

Sorry to hear that.

 

Picked up in PA heading to WI 82,000# Trying to deliver before noon Mon... I could really use the Bandit..

 

Run them back roads, less traffic, DEMO.

 

I have 27' in my well. Had to remove the DOT bar to get it over the back. It had 8 - 3/4" bolts holding it. Hopefult yours is not welded... Lower the lift arms, they will be the higest point. If it has a can on the forks they will fit inside the trash compartment. You will have to load it in there with another truck. I have a 22" deck height also, sometimes I can drop to 18". If your deck is 22" I can tell you it will sit at 15' 1". I had to let the air out of the tires. The lowest I could get it was 14'6". You could probably get it lower, but you would have to let all the air out & block the axles up. It was a pain in the ###, but paid well. I don't normaly post money, but you have a dog in the fight. Mine payed over $6 per mile for a 450mile run. PM if you want my number in case you have any trouble loading.

 

Just don't compact it.

 

You have to quit giving the hefty girls rides.

 

Were they singing ladies out of curiousity?? All joking aside, I wish you the best passingthru and hope everthing goes smoothly going forward.

KH

 

49 meter blades on this run.
11' wide, 14'8" tall, 185' overall length.
Trailer is all the way out, which is rare for most blades. With the rear porch (extension) piece out 15', there is 24' of rear overhang on it. Needless to say, my rear escort is earning his money with these....



Martin

 

This will be an opportunityto grow but I am a little anxious .... wish I was getting more money or loading with help on site.

 

If all else fails, drive the garbage truck to it's delivery site LOL