Power inverters, wattage information, what do you recommend?

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by JUST17, Jan 22, 2019.

  1. JUST17

    JUST17 Bobtail Member

    8
    2
    Jan 14, 2019
    0
    Lol pretty much
     
    MidWest_MacDaddy Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. JUST17

    JUST17 Bobtail Member

    8
    2
    Jan 14, 2019
    0
    Ok thanks
     
  4. Rudedud&Red

    Rudedud&Red Bobtail Member

    21
    9
    Feb 2, 2019
    0
    For the price and warranty it can't be beat
     
  5. Tb0n3

    Tb0n3 Road Train Member

    4,096
    7,721
    Oct 5, 2012
    Earth
    0
    Some are good, some are really bad. The video is a bad one. A lot seem to go with 1800W because it matches 15A appliances pretty well. 1800W / 120V = 15A

     
  6. MidWest_MacDaddy

    MidWest_MacDaddy Road Train Member

    10,709
    17,459
    Feb 21, 2015
    South Carolina
    0
    Is it pure sine wave too?
     
  7. VolvoTerry

    VolvoTerry Light Load Member

    292
    373
    Sep 7, 2015
    Based out of Omaha,NE
    0
    In my opinion 2kw or larger. Pure sine wave is a must. The further from the batteries the larger the wire guage you will need. And always place a large fuse close to the battery end of the power wire. I recently switched from the Xantrex 2000 watt inverter/Charger to an Aims 3kw with a larger built in battery charger. Both are/were pure sine wave. I also make it a point to use inverters with remote cabling so I can quickly and easily power down the unit from in the cab while the inverter is mounted in the side box.
     
    MidWest_MacDaddy Thanks this.
  8. JReding

    JReding Road Train Member

    1,954
    3,492
    Sep 8, 2014
    Puyallup, WA
    0
    One thing you may want to do, if you’re a company driver, ask your company if they have a maximum wattage allowance. If they have one and you exceed it, you may run into trouble if anything should happen. And also check as to whether they will let you install it, or if they will do it for you. My company allows a maximum 1,500 watts, I’m assuming for safety/insurance reasons. I bought my own, and they installed it for me, including the battery cables, because they wanted a clean job that would have minimal impact on the resale value of the truck.
     
    MidWest_MacDaddy and Tb0n3 Thank this.
  9. HighwaySuperTramp

    HighwaySuperTramp Medium Load Member

    316
    347
    Feb 8, 2015
    0
    Pure sine is the best way to go for an inverter. They are more expensive but in the long term they will eat less appliances. You want an inverter that is at minimum 60% of your maximum load. So 1500w for a 700w microwave. This will help with the longevity of your inverter. Yes a 1500w inverter will run 1500w steady with a surge of 3000w, but a 3000w inverter or a 2000w interver will run that same load for nearly double or triple that time. Capacitors are larger, cooling units work better, and as soon as you get it, your gonna start to like it and want to use it more and more.

    I currently have an 1800w inverter/battery charger. I run a kettle, blender, and 4 chargers for smaller appliances. I'll never burn my inverter out.

    Food for though.
     
    Roberts450 and uncleal13 Thank this.
  10. volvoindistress

    volvoindistress Bobtail Member

    3
    0
    Mar 11, 2020
    0
    What kind of power inverter I need for PlayStation 4 pro because the power drive 400 watt one from these truck stops suck
     
  11. InTooDeep

    InTooDeep Donner party survivor

    4,976
    37,283
    Jan 17, 2016
    Carmichael CA
    0
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.