radio question

Discussion in 'Swift' started by RobertSmith, Dec 29, 2010.

  1. RobertSmith

    RobertSmith Medium Load Member

    i got that 2010 volvo , you know the one they issue with the busted up bumper and taped in sleeper windows.

    What am i missing, trying to get the 2 speakers in the sleeper area to play, theres got to be an option or button somewhere that i'm not finding.

    Any idea?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. DickJones

    DickJones Road Train Member

    1,287
    592
    Aug 16, 2010
    0
    its in the setup on the stero. you want to find "fade" and turn the knob till you get them going.

    its been a while since i've been in mine, but it was a 2009 Volvo..but prob. still has the same radio....

    if that dont work...find the two metal 'handles' that you fit into each side of the radio to pull it out of the dash. the bottom left (as you look at the radio) wire bundle is the power...disconnect it...then plug it back in and put it back in the dash. seemed to do the trick for me.
     
  4. FriedTater

    FriedTater Keeper of The Snakes

    2,202
    887
    Mar 25, 2009
    United State of Texas
    0
  5. RobertSmith

    RobertSmith Medium Load Member

    fade doesn't do it. I figured maybe there some junk to turn them off for a person sleeping.
     
  6. RobertSmith

    RobertSmith Medium Load Member

    if i fade all the way to the rear I get no sound at all, puzzling.
     
  7. DickJones

    DickJones Road Train Member

    1,287
    592
    Aug 16, 2010
    0
    try pulling the radio out? someone had the truck before you? how many miles on it?
     
  8. RobertSmith

    RobertSmith Medium Load Member

    185k and yeah the guy before me was a slob, took crap care of this thing,

    I wish I had the manual for this, I have a feeling its one of the many things this sleeper panel does that I can't figure out.
     
  9. Kagetsu

    Kagetsu Bobtail Member

    39
    3
    Sep 24, 2007
    Maryland
    0
    Look for "fade". Balance is side to side, fade is front to back. It's usually after base treble and balance. I'm guessing they're wired?
     
  10. Injun

    Injun Road Train Member

    8,501
    9,491
    May 15, 2010
    West o' the Big Crick
    0
    Look at your control panel in the sleeper. You probably have a speaker switch on it somewhere or volume knob or something. Try that.
     
    panhandlepat Thanks this.
  11. RobertSmith

    RobertSmith Medium Load Member

    pain in the butt, I'm gonna try and get a new truck i think. the jake and the cruise are out on this thing, Just waiiting till i see an unassigned truck at our terminal before i report it.

    I know dumb thing to do, but I really can't afford time off.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.