Rand McNally intelliRoute TND 500

http://maps.google.com/maps?f=q&sou...203888,-119.032724&spn=0.010541,0.019248&z=16

I delivered in the Port of Hueneme, Ca yesterday and was heading
back to the 101 on S Lewis Rd. Normally I just go straight and hit
the 101 well the TND showed that if I took the right onto Pleasant
Valley Rd it would take me to the 101 which is the way it routed me.

As I was starting to make the right onto Pleasant Valley I noticed
a sign showing a truck with a cross through it saying no trucks with
2 or more axles, luckily I wasn't committed to the turn and was able
to keep going straight.

Mark you may want to have Rand check this out.

Thanks

Doug

 

Normally when the ramp you need has truck attributes in error. Report those to RM and they will see that they are corrected.

I see that you posted your TND failed after 8 hours - more on this?

Thanks,
Mark

 

Were you able to get the TND to be seen by the TND Dock? I was wondering since we have not heard back from you..

Thanks,
Mark

 

It does it when there are no ramps involved. It seems to think there is no way across the median even if there is no median so it routes you around the block to come up the other side.

 

Does anyone have an example that I can try to run on a demo mode to see?

Thanks,
Mark

 

There was a Pilot in southwest Memphis, TN that routed me that way as I came up from the south. Don't remember which highway, but it was a state 4 lane intersecting another state 4 lane.

 

Confirmed the problem with the list button. If you start typing an address, the list button is replaced by the enter button. It does not come back even if you delete all the numbers.

 

Ah,,, The button changes from List to Enter,,, but if you DEL the numbers you put and hit "Enter" it still comes back with a range..

More or less screen functionality...

Thanks,
Mark

 

Coonass
"Freshy Fresh"
Last Seen: 42 Minutes Ago 12.01 PM
Member Since: Sep 2008
Location: LA
Trucker? 2 Years
Age: 25
Posts: 1,647
My Trucking Photos: 0


Thanks: 362
Thanked: 411 Times

http://maps.google.com/maps?hl=en&ie...,0.019248&z=16

Coming W from Breaux Bridge, La on Hwy 94 trucks 5 or more axles cannot
Make a left onto E Pinhook Rd to get to the Evangeline Thurway. The sign
is
Clearly posted for this and the TND tried routing me this way.

Mark I just updated my TND before reading that you told everyone not to,
Hopefully I don't have any problems but if I do I will let you know.
--------------------------------------------------------

From RM: added a bug to the quality center.

Thanks,
Mark

 

Espressolane
Light Load Member
Last Seen: 3 Hours Ago 04.30 AM
Member Since: Nov 2009
Location: Minden, NV
Trucker? 4 Years
Posts: 92
My Trucking Photos: 0


Thanks: 2
Thanked: 17 Times

Quote:
Originally Posted by cc194217
No vehicles or loads greater than 13'0" are allowed on I-25 in Denver
Between milepost 200.11 (jct. With I-225) and milepost 213.85 (jct. With
I-70). Over height loads detour is I-225 to I-70, I-70 to I-25

*****************************'
This restriction is still valid according to RM's research.

Thanks,
Mark