Truckers Report Jobs

Find Trucking Jobs

Company Driver Company Driver Dry Van Dry Van Flatbed Flatbed Refrigerated Refrigerated Specialized Specialized Owner Operator Owner Operator
More Trucking Job Searches ⌄ Fewer Trucking Job Searches
⌃

Rebuilt 10 spd transmission whining in every gear ?

Discussion in 'Heavy Duty Diesel Truck Mechanics Forum' started by jeffl0123, Feb 18, 2022.

  1. Feb 18, 2022 #1
    jeffl0123

    jeffl0123 Light Load Member

    60
    14
    Jan 18, 2018
    0
    So I know there are going to be some that say trash the Rockwell and get a Eaton Fuller. I would like to but I don't see myself in the truck for long term so really don't want to put a bunch of money into it. Anyway, I have a 99 International 8100 with a 10 sp Rockwell with Cummins M11. I had a rebuilt tranny put in. I have had it out with the company I got the tranny from and without going to court about it which is not worth it, they will do nothing. Ever since I got the tranny from them it has a whine. It does it in every gear. Anywhere around 1500 rpm and up it is really bad. What could this be? Anyone have any ideas? I would like to get this fixed if possible. I don't know, it might be better to just get another one. Any thoughts? Thanks
     
    jeffl0123, Feb 18, 2022
    jeffl0123, Feb 18, 2022
    #1
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Feb 18, 2022 #2
    baha

    baha Road Train Member

    4,137
    2,835
    Jul 25, 2013
    ga
    0
    Ck and change the gear oil in it and look carefully at both plugs for a cone of metal shavings on end of each plug if the fill plug has a lot of big things stuck on it, find out where they got it from and bypass the shop and go to rebuilding shop for help?
     
    baha, Feb 18, 2022
    baha, Feb 18, 2022
    #2
    Rideandrepair, BoxCarKidd, beastr123 and 1 other person Thank this.
  4. Feb 18, 2022 #3
    BoxCarKidd

    BoxCarKidd Road Train Member

    4,430
    6,467
    Aug 26, 2014
    0
    I put a 13 spd fuller in a GMC General around 1992. It came from Kerns in Atlanta and it had a bad whine.
    The owner set it up with them for a time he would be in the area. He said they picked the front up with a forklift, under the tires, on each side at the same time and set it on stands. Then did the rear axles. Spun it up and rolled around under it on a creeper. Said it is in the back box. Swapped out the back box.
    Told him sorry for the problem. Sometimes even a new bearing can make a noise. Thanks for the business and have a good day.
    It could be lots of different things. Stinks when people will not back up their work.
     
    BoxCarKidd, Feb 18, 2022
    BoxCarKidd, Feb 18, 2022
    #3
    Rideandrepair and baha Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.