Record engine RPM and driving information?

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Renifizzle, Feb 16, 2013.

  1. Renifizzle

    Renifizzle Bobtail Member

    Joined:
    Jun 7, 2012
    Messages:
    7
    Thanks Received:
    1
    0
    Is there any device that would let you record the trucks RPM/speed/etc that you can install in the truck?
     
  2. heyns57

    heyns57 Road Train Member

    Joined:
    Dec 30, 2006
    Messages:
    2,209
    Thanks Received:
    1,011
    Location:
    near Kalamazoo Speedway
    0
    My employer had such a device installed in about 1985. Driver entered codes for destination, weather, etc. Tape about the size of a VHS was subsequently used to make a printout. Supervisor asked stupid question about a rise in RPM. I explained that the speed limit had changed as I approached a town, and I downshifted. After the second trip, the device failed due to bounce and vibration of trucking equipment. Device was returned to manufacturer.
     
  3. otherhalftw

    otherhalftw R.I.P.

    Joined:
    Nov 18, 2008
    Messages:
    13,081
    Thanks Received:
    45,332
    Location:
    CA...gold discovery foothills
    0
    It's called QuallComm...records everything! Speed, RPM, hard breaking, excessive speed in turns, idle time, time in cruise, time in top gear....
     
    Renifizzle Thanks this.
  4. Renifizzle

    Renifizzle Bobtail Member

    Joined:
    Jun 7, 2012
    Messages:
    7
    Thanks Received:
    1
    0
    Thanks, I was wondering if those did that.
    We had a truck just blow a top end because valve rods were bent, broke a rocker or two and cracked the rocker shaft. Plus we're getting HORRIBLE fuel mileage.

    I need a way to make sure these problems couldn't have been prevented.
     
    otherhalftw Thanks this.