2016 freight liner cascadia.dd13. I can't find this code anywhere.
At idle rpms bouncing between 5500 rpms and 6k. Then will level off and do it again.
About six months ago injector 4 was replaced. But the serial number of the injector had not been entered in yet. I don't think that's the cause, namely because this is only a day or two new issue.
I down loaded two spn code books and could not find it. Ill let the boss know Tommrow. But if its something I can tighten or clean id rather not give another 4 hours to the T A.
Any help would be fantastic. Thanks in advance.
Edit: I just tested the high idle. It has the same 500ish rpm variance.
Spn 274203 fmi 5
Discussion in 'Ask An Owner Operator' started by feldsforever, Mar 13, 2021.
-
Last edited: Mar 13, 2021
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
The error comes up as a suspension air ride error. Axle 3, left sensor, open or low current harness/sensor issue.
iggybest, Keepforgettingmypassword and feldsforever Thank this. -
Fuel quantity valve might be your culprit , maybe the code is for something else.
Keepforgettingmypassword and feldsforever Thank this. -
Thanks guys.!!
@Ridgeline where did you find the code? -
iggybest, Keepforgettingmypassword and feldsforever Thank this.
-
If she's turning at 6k RPM when idling you've got bigger problems than an air ride sensor lol.
A Google search can usually pull up code descriptions. Everything electronic on a truck "talks" with the same language so all the codes are more or less standardized regardless of manufacturer.iggybest, Keepforgettingmypassword, feldsforever and 1 other person Thank this. -
Keepforgettingmypassword and feldsforever Thank this.
-
@AModelCat . lmao
Good catch didn't realise I added a extra 0.77fib77 Thanks this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.