Getting ready to finish up on the swap on my 95 FLD. Hopefully getting the driveshaft shortened and balanced tomorrow. Have a question on speed sensors. My original 15710 had a screw in 4 wire speed sensor. The new 16913 has push in sensors. Is there an adaptor or clamp available to use the screw in, or will I have to switch to a push in. If I have to go to a push in style, need to find the 4 wire for a Freightliner. Anyone have a part number?
Still working on my 13 speed swap
Discussion in 'Freightliner Forum' started by W Bench Farms, Jan 4, 2022.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
last time i ran into the problem i took the little housing off the trans and put it on the other trans and keeped my sensor
-
you can get just sensor housing with screw in type weller should be able to find one for you based on trans number.
-
Ended up talking to a couple guys here, and think I have it figured out. Went to Freightliner, and got a 4 pin push in sensor with an adaptor harness. Only ended up totaling around $50. The other option was to use two sensors, but would still need adaptor pigtails for both.
Rideandrepair Thanks this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.