Support Thread for the TND 500, TND 700 or future Rand McNally products. (part two)

Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Jul 7, 2014.

Thread Status:
Not open for further replies.
  1. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    You can also zoom the map out, tap on the map, find where you want to be routed to (green +), zoom in to put the green + on the ramp and at the bottom hit route to here.

    Thanks,
    Mark
     
    mike-v Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    RM nor anybody else can control when they move the satellites. All GPS use different receivers.

    Preferences/general/GPS status/right side will tell you signal quality and at the bottom used/seen.

    Thanks,
    Mark
     
  4. EekABunny

    EekABunny Light Load Member

    65
    10
    Feb 28, 2012
    0
    Updated my previous post
     
  5. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    Give me an example.

    Thanks,
    Mark
     
  6. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    Some did not have issues and some did. Mainly the ones with the 720's, but the problems vary so it would not have been useful to send out instructions on how to do the download if you had issues. I know I worked on a few over that weekend and it averaged 3-4 hours per person to get the computer working correctly to accept the download. Mainly it was on the computer side that the issues existed.

    Thanks,
    Mark
     
  7. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    DO NOT FORMAT IT... Send me a PM and I will work with you and remote into your computer if needed. You will need to be on a high speed network.

    PS - you need 7 posts to PM me.

    Thanks,
    Mark
     
  8. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    Yes it is, it is just some computers are not playing well with the 720's.

    Thanks,
    mark
     
  9. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0

    Yes to copying it to the PC and putting it on the Class 10 card. Remember a Class 4 is 4mb/sec and a class 10 is 10mb/sec.

    If you put in your entire route, then on the map screen, go to the Turn by Turn (right side -x____), bottom is Route Display Options/Summary Map View

    Thanks
    Mark
     
  10. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    The bridge is new. Not in your set of maps. I have not gotten the next set of Maps to verify yet.

    Thanks,
    mark
     
  11. Mark Kling

    Mark Kling Technology Contributor

    10,935
    4,197
    Sep 23, 2007
    Statesville, NC
    0
    Did you have it set to avoid Freeways?

    Thanks,
    Mark
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Thread Status:
    Not open for further replies.