OK Mark
I got a new issue going on now with my 740.
it keeps going into screen saver mode.
driving down the road, GPS running and screen saver comes up. tap screen get map. 10 seconds later- 5 mins later (totally random) back to screen saver.
I'm thinking it has to do with the connection to base. but how do i fix it??
Support Thread for the TND 500, TND 700 or future Rand McNally products. (part two)
Discussion in 'Trucking Electronics, Gadgets and Software Forum' started by Mark Kling, Jul 7, 2014.
- Thread Status:
- Not open for further replies.
Page 439 of 470
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Thanks,
mark -
RM does not own the Map Database. RM can "add" or "Merge" our DB's as needed, IE - restrictions, but the quarterly update does not "correct" the current map database, but the program sees the update and uses that data to post more current restrictions/speeds.
Thanks,
Mark -
-
Go to Main Screen/Cog (bottom left)/System Settings (top right)/battery (left towards bottom)/ - what % of battery charge do you see on the Slice? It should be going up towards 100%. If it is headed down, then try a Micro USB to DC directly to the 740 on left side and see if the battery % goes up. If it does then it is the Slice.
Thanks,
Mark -
-
when it has gone to screen mode, i have noticed when i tap it, if i also wiggle it, it goes back and forth to map/screen saver -
the King has spoken -
-
A friend had a similar unit but I think his was the tablet style, not built into the dash like mine. I will ask the shop guys when I get back tomorrow.
Thanks for your help.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 439 of 470
- Thread Status:
- Not open for further replies.