T600 issues with turn signals

Discussion in 'Kenworth Forum' started by Factransport, Jul 16, 2013.

  1. Factransport

    Factransport Bobtail Member

    8
    0
    Jul 16, 2013
    0
    Rear t/signals and flashers work fine but the front turn signals and flashers( hazards ) are not working at all !!!! Help please!!!!
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. snowwy

    snowwy Road Train Member

    20,535
    13,271
    Jul 6, 2009
    0
    if i had to guess. it would be the turn signal switch. or broken wire(s). between the switch and front turns.

    if it's possible to have 2 flasher relays. maybe one of those also.

    i had a w9 that wouldn't work when the trailer was unplugged. no turns or flashers. the turn switch itself had a bad ground connection.
     
  4. Factransport

    Factransport Bobtail Member

    8
    0
    Jul 16, 2013
    0
    Thanks for the ideas, ill have to check the quantity of relays, also I don't have a trailer hooked up now but ill go and hook and try tha.
     
  5. kwswan

    kwswan Road Train Member

    1,930
    10,171
    Jul 26, 2009
    mcminnville,tn.
    0
    Only one flasher relay. It is more than likely a ground issue. I had problems last year with my 03 t600, headlights & turns were acting up. It was a ground wire in the dash.
     
  6. Factransport

    Factransport Bobtail Member

    8
    0
    Jul 16, 2013
    0
    Ground wire from the t/s switch?
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.