I'm looking to puchase one of these... they come in 12 and 15 feet... My thinking was that I only need the 12 feet but then while at a petro the guy in the shop tells me they only sell the 15 feet and everyone buys them up... I would think the 15 footer would be for guys with stretched out equipment... I'm buying online so anyone have a similar setup can tell me did you go with 12 or 15 feet? Maybe I'm over thinking this....lol. My truck is pictured below.
Tectran 3 in 1, what length do I need?
Discussion in 'Ask An Owner Operator' started by HalpinUout, Jul 23, 2017.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
I would think 12 ft would be fine. I want to replace my lines & I want the shortest I can get away with.
HalpinUout Thanks this. -
That looks sweet......
HalpinUout Thanks this. -
I run 20' lines on mine. 15' is just too short...but then I've got 8.5' between the back of my cab and the front of a van, and another foot and a half gap when I'm pulling a skateboard, and a little more than that even on certain end dump trailers I've hooked to. Got to have enough line to stretch when you make a turn. My first set, I built...got the rubber hose, cut to length, attached the ends, and did the same with a 7-conductor cable and the plug ends. Currently, it's a special order job where the coiled red & blue lines are paired together and the electric coil runs through the center.
DDlighttruck and RStewart Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.