Give me a call when u have a chance and I’ll get u some pointers. Phone 6306078889 to much #### going on to write everything on here.
volvo D13 oil separator has oil coming out from pipe
Discussion in 'Volvo Forum' started by calvint88, Feb 21, 2016.
Page 9 of 9
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
Had the code come up over a Month ago and changed the Crank Case Pressure Sensor. Now after a month, the code is back. Any ideas?
-
-
You have another post about a DD13 . Do you have a D13 or DD13. They aren't the same.
-
-
Id just get a new oil separator it is worth the money, I had the same issue started losing a lot of oil. Replaced it and I'm back to not adding a drop of oil between changes. truck is at 750k and 29k hrs with no blowby.
You can verify by having the truck warmed up to temp and then take the oil fill cap off while idling. I'd bet you have little to no blow by, and it is the separator is broke and not spinning (its a centrifuge powered by engine oil pressure). -
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 9 of 9