Walmart here I come 2.0

Great, but what is the setup. What type of backing are we doing. Thats the information I'm really looking for.

 

So it's not a crazy exotic backing setup. Thanks for the heads up (especially about the arm, that is the one thing I do. It's going to be awkward to not do it.

 

2 trailers will be parked with a space between them that you'll be backing into. The trailer you'll be backing will be to the left of the 2. You'll have a small area in which to move and position the truck/trailer for the backing, usually marked with cones. It's a fail if you go outside the cones when backing. Obviously also a fail if you back into anything. Other than that, pull the trailer you're backing into any setup you see fit, and put it in the hole. They give you plenty of time to back up, and you can get out as many times as you need (recommended). If you set up for the back properly, it's fairly easy and straightforward.

 

Speaking of backing up when I was there they always wanted you to back into a space, not do a pull thru even if there's a wide open space.

 

Here’s a swift doing no no pulling a Walmart trl..