Well it happened. Got an over dimension citation.

Run Utah a lot... Never been hassled about axle positioning... Even when slammed clear to the rear.

 

According to trucker atlas no kpra restrictions in Utah... Unless it has changed since the 2018 edition was printed.

 

I have the 2019 edition and it also shows no restrictions in Utah.

 

Yes it was down on the 3rd when I went past it... They got the scale out of the ground.

 

There is a note in the trucker atlas that points to Vermont (which has the 41' restriction) and I can see how someone could too easily mistake that note as applying to Utah, not Vermont due to it's location, size and arrow.

 

The only thing I knew about Utah, and hopefully they have changed this, but if you had a drom even a 2 foot one, they considered it a flat bed truck, which made a 53 illegal. I only knew of a couple of times they nailed someone for it though.

 

then whey isnt it called track length law. its about the weight spacing between axles. so thats why its called bridge law

 

Tenn does measure, especially when the Gorge is closed and everybody has to run up 26 to 81south. that south bound scale will take the tape out.

I believe there has been another rock slide, so over the mtn. you go.