Where is everyone #5

Or.....just go to napa and get a new service valve.........oh wait, I see what yer doing. Getting yer story straight so ya can take time off or a new wagon. ......never mind.

 

Use bob1's shop.... only take three days if the motor don't need rebuilt....might have them check the batteries while there...you probably running the wrong ones....

 

Yes and no.

The thing that scares me are the wires going into the top of it? No wires no problem.

Have one on the truck almost exactly like it. Spent $350 dollars on it and it leaks just like the old one. Changed both cans and the valve just before it and nothing changes. That was 3 years ago so i guess it just leaks?

My guess is this will be very similar issue?

 

Wink

I see what you did there?

 

Abs module? pretty common.

 

Take the feed line off and put in a few drops of oil or whatever you have for light lubricant. It'll quit if it's not torn.

 

I had a brake hanging and not releasing on my lowboy, sprayed some WD-40 in the gladhands, brake released after the spray hit the valve...

 

We must have had the same guy. Puco guy was audited by his boss. His boss mixed up info for me and another carrier. Auditor was having a peeing match and waited for everything to get rejected that his boss filled. He even called and explained this to me and why he was about to let the boss F it all up with no negative penalties to me.

I told him I like it when the man sticks to to the man that work for the Man, what do you need Sir.


Really a nice guy with me.

 

Sprayed the lines about 4 times today. Good thinking though. I like they way you guys think.

Are they all the same or are there differences? I guess maybe the plug is different with manufacturers?


I’m sure it will all work out fine. I’m (learned) just a “half empty” kinda guy till someone proves me wrong. Lol

 

You need to unscrew the valve and spray down the main port. Or drain everything and spray down the red line ports. Most likely a piece of rust has come out of your tank and got into the valve. It should clear itself it just needs a little ky