Came thru WV with this Freightliner Slug yesterday. Coming out of NC into VA up Fancy Gap...30ish mph. Flat Top, almost the same.
I did find out that there is an additional mode to the E-coast mode...I call it the O-#### mode. It decides to E-coast at the top of a long hill, then when it hits 68-69 mph it goes into O-#### mode, jams the tranny into 10th gear, and goes to High on the jake almost red lining the engine....Go ahead truck, blow yourself up...I have a dashcam with audio...that way I can prove it wasn't me.
Snackbar is chillin'....at Shaffer
Discussion in 'Discuss Your Favorite Trucking Company Here' started by supersnackbar, Oct 26, 2020.
Page 28 of 1076
-
Itsbrokeagain, Knucklehead, Dale thompson and 7 others Thank this.
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Itsbrokeagain and 650cat425 Thank this.
-
Heard a rumor the other day.
If you tune the radio to a Spanish music station it disables all that crap...
I guess assuming the truck was built in Tijuana..
Seriously though, these companies stress the drivers to the max to save a teaspoon of fuel....... SMDHDale thompson, 650cat425, mushroom1464 and 1 other person Thank this. -
But, things could be worse. A friend of mine that left Wy-Moore and went to Frayley Shilling says his camera system reads speed limit signs...but not words, just the numbers. So when going thru these construction zones that have a reduced speed limit only 'when flashing' triggers his camera, and his truck tells him he's speeding. Plus, on normal roads, he does like many of us do, and pushes up to 5 mph over the posted...he gets dinged there too. It also picks up frontage road and scale speed limit signs (when he's on the interstate)...and all this gets sent to their corporate safety department.Lostmykey, Itsbrokeagain, Dale thompson and 2 others Thank this. -
You could cause people to have heart attacks if you’re going 65 on the rte 10 freeway.Lostmykey, Dale thompson, 650cat425 and 1 other person Thank this. -
Dale thompson, Bumper and MACK E-6 Thank this.
-
I’ve driven a Penske loaner truck with all that stuff on it. Hard to get used to. Glad the company I work for turned all that crap off... All our tractors are Penske leases and they tried to talk the owner into keeping it all turned on and lowering the governor speed. But he told them all his best drivers would leave. So we are at 72 and no babysitting.
But the cruise issues y’all speak of I also have. It likes to coast at the top of a hill and then do the high Jake, 2000+ rpm.
I have solved this by turning off the cruise on the way up and adjusting the Jake accordingly on the way down...
On a real long hill like Fancy Gap, sometimes, I will set the cruise at 5 mph below the speed I want cruise at down the hill and have the ‘overspeed’ set at +5 MPH... it does a real good job holding that speed all the way down.
Setting the ‘under speed’ to 0 keeps it from going into ‘coast’ as much.Dale thompson and MACK E-6 Thank this. -
Dale thompson Thanks this.
-
How do you set the underspeed on the cruise?
-
With ours, the only way to do 65 is on cruise. On the pedal it's 61.5, so I keep it on cruise as much as possible. We can still force an upshift or downshift as long as the engine speed is within acceptable parameters (geez I sound like an instruction manual). So I have found that cruise uphill is ok, but I force a downshift earlier than it would like, and my hill climbing is less of a snail's pace.
Dale thompson and 650cat425 Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 28 of 1076