I have a used turbo off my 12.7 S60.
Friend has an 11.1 S60 farm truck with a blown turbo.
Both are Garret.
Can he use it - ? My mechanic thinks it spins faster with more pressure and would risk engine damage.
Swapping 12.7 turbo to an 11.1
Discussion in 'Trucks [ Eighteen Wheelers ]' started by blairandgretchen, Dec 16, 2020.
Page 1 of 3
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
@jamespmack might know. Does the 11.1 use K31?
Rideandrepair and blairandgretchen Thank this. -
Won't see why it wouldn't work. If anything the A/R on the 12.7 might be a tad larger giving a tad more lag and less drive pressure
Rideandrepair Thanks this. -
With out part numbers you peeing in the wind. My guess is it will run, but worse than before.
Rideandrepair, Dave_in_AZ, blairandgretchen and 1 other person Thank this. -
A reman original garret can be had for $526 on sale currently at M&D distributors. A new B&W can’t be much more. Dave’s Turbo is a good source. I found the specs, courtesy Jegs. Obviously the smaller ones for the 11.1
RubyEagle and blairandgretchen Thank this. -
Part# for 12.7- 171702. 11.1- 169012. Pretty sure that’s right.
blairandgretchen Thanks this. -
Those #s might be for non wastegated turbos. I think wastegated ends in 1. Either way make sure, depending on what he wants.
-
Buddies truck is a ‘92 White/Volvo with the 11.1 in it. He loads the poor thing to 100k gross with beans and grain and hauls 5 miles to town.
He’s keen on saving a buck, mechanic is nervous about the idea.
If it were me, obviously - new correct turbo and go on. He, well - farmers, you know. -
Brettj3876 and Rideandrepair Thank this.
-
If thats the case. Yes yours will work. Its going to preform poorly compaired to what came off. Highly doubt it will lead to a over boost situation.
I can dig out my books when I get home.650cat425, blairandgretchen and Rideandrepair Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 1 of 3