An old man's career goes flat, Snackbar moves to open deck

Discussion in 'Discuss Your Favorite Trucking Company Here' started by supersnackbar, Jul 27, 2022.

  1. supersnackbar

    supersnackbar Road Train Member

    19,189
    47,572
    Aug 19, 2007
    Your Town, USA
    0
    Checked the Peoplenet yesterday, and it has more fault codes now than before it went into the shop...I hope that place isn't like Poly's shop was when Hyatt was running it...there, the trucks came out with more issues than it went in with.
     
    JoeyJunk and 48Packard Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. 48Packard

    48Packard Ol' Two-stop Shag!

    8,348
    9,871
    Apr 19, 2009
    Could be anywhere
    0
    Dropped an mt at the SC Poly facility a few weeks ago as I was headed home and they needed it. I casually remarked to the security officer that I had nearly taken a driving job there but was scared off by the number of truck issues.

    She was not surprised. :confused:
     
    Lonesome and JoeyJunk Thank this.
  4. InTooDeep

    InTooDeep Donner party survivor

    4,981
    37,363
    Jan 17, 2016
    Carmichael CA
    0
    My wife has knee issues also I dropped our pick up down a couple inches. It made a big difference for her getting in and out. It doesn't look half bad and no not like a low rider low lol
     
  5. JoeyJunk

    JoeyJunk Road Train Member

    8,763
    68,032
    Dec 31, 2010
    Washington, PA
    0
    Oh wow. Good news I assume?
     
  6. supersnackbar

    supersnackbar Road Train Member

    19,189
    47,572
    Aug 19, 2007
    Your Town, USA
    0
    Turned on my wipers to wash the dust and dirt off my windshield while loading up this afternoon and....the motor runs, but the wipers don't move...un-freeking believable. Lake City, FL Mack-Volvo has to be one of the worst dealerships in the network.



    IMG_20230715_162035.jpg



    Found the problem. The nut that holds the linkage to the motor wasn't even finger tight...I reached up and spun it off standing in the ground with my left hand, I didn't even have to climb up on the tire and use a wrench.
     
    Last edited: Jul 15, 2023
  7. 201773

    201773 Medium Load Member

    491
    828
    Dec 14, 2020
    0
  8. Lonesome

    Lonesome Mr. Sarcasm

    11,186
    22,971
    Dec 15, 2007
    Northern Indiana
    0
    Rivian looks good? That design looks like a truck I drew in the first grade.
     
  9. 48Packard

    48Packard Ol' Two-stop Shag!

    8,348
    9,871
    Apr 19, 2009
    Could be anywhere
    0
    It’s a work in progress as expected, but yes..good news. I never wanted the split in the first place. But we’re working hard to make it work.
     
  10. Lonesome

    Lonesome Mr. Sarcasm

    11,186
    22,971
    Dec 15, 2007
    Northern Indiana
    0
    I'd make sure the Lake City service dept, and someone higher up at SPD were made aware of this.
     
    wulfman75 and JohnBoy Thank this.
  11. 201773

    201773 Medium Load Member

    491
    828
    Dec 14, 2020
    0
    Is that a nylon lock nut? You'd think it would call for one for that application.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.