mercer transportation

Discussion in 'Mercer' started by kw12, Jul 21, 2012.

  1. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,376
    Jul 16, 2012
    Bentonville Arkansas
    0
    Yea I got the part number. Called 3 more part store they said they have to order it. Tk in Fargo is closed unless I get after hours and no way I'm doing that lol
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. spyder7723

    spyder7723 Road Train Member

    15,470
    25,061
    Mar 31, 2013
    sarasota, fl
    0
    Do you have tk's part number, or the actual belt manufacturers number. If the manufacturers number, you could find it a LOT easier. It's it a serpentine belt or a vbelt?
     
  4. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,376
    Jul 16, 2012
    Bentonville Arkansas
    0
    My apu is carrier but I'm sure I could get at any of em lol. It's a vbelt. The number I have comes off the belt. It's a bx43. Called am orileys but no way for me to park nearby.
     
  5. spyder7723

    spyder7723 Road Train Member

    15,470
    25,061
    Mar 31, 2013
    sarasota, fl
    0
    Find an autozone or advanced. Many times there are located with in a short walk of a big plaza.
     
    TruckerPete1990 Thanks this.
  6. stranger

    stranger Road Train Member

    3,640
    4,959
    Oct 10, 2006
    NC
    0
    BX43 Belt

    21/32" Wide cogged belt with 46"outside circumfrence.
    Bestorq V-belts are constructed from pre-stretched polyester cord. They are oil and heat resistant to insure maximum performance and life span. Cogged belts reduce heat from friction, better performance on small OD pulleys and ,because of the banded design, have a higher working strength over plane classical belts.

    These belts are constructed of specially engineered, high performance components and are manufactured using the latest belt technology including helically wound tensile cords and pre-stretched polyester material.

    All major belt makers use the same BX43 part number for this belt and is listed by that number at auto parts houses.
     
    Last edited: Oct 10, 2015
  7. CJndaTruck

    CJndaTruck Road Train Member

    3,348
    3,364
    Nov 21, 2014
    Knoxville, TN (area)
    0
    Trying to deliver in downtown Chicago on a Saturday night before the Marathon in the morning is a pain. But it's probably better now vice 5am and getting locked in all day cause of the race.
     
  8. HalpinUout

    HalpinUout Road Train Member

    7,074
    18,165
    Oct 2, 2011
    0
    How did you make out? Ya lots of streets blocked for the Marathon...
     
  9. CJndaTruck

    CJndaTruck Road Train Member

    3,348
    3,364
    Nov 21, 2014
    Knoxville, TN (area)
    0
    Well I made it out. Delivered on N. Michigan in the heart of the shopping and dinning district. I learned a long time ago to just go slow and block the whole road. LOL.

    For 24 hrs of being in the truck it was well worth it. I really don't mind Chicago, Boston and the like. NYC is only bad cause there are so many low clearances. But still manageable and I'll run there if the $ is right.
     
    77fib77 and HalpinUout Thank this.
  10. sanchez51476

    sanchez51476 Bobtail Member

    28
    5
    Sep 2, 2015
    0
    Is it flat that your doing
     
  11. CJndaTruck

    CJndaTruck Road Train Member

    3,348
    3,364
    Nov 21, 2014
    Knoxville, TN (area)
    0
    Yep, I run flats.
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.