mercer transportation

Discussion in 'Mercer' started by kw12, Jul 21, 2012.

  1. Razorwyr

    Razorwyr Road Train Member

    2,284
    2,824
    Jul 27, 2010
    Meridian, Mississippi
    0
    I don't. I try not to put them directly above the tires, but even when I've had to, I've had no issues with them touching. I do have 4 2" straps and hand winches, but I seldomly use them
     
    HalpinUout Thanks this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. The_Gambler

    The_Gambler Bobtail Member

    34
    36
    Aug 11, 2015
    0
    Come on in, the water's perfect.
     
    Airborne Thanks this.
  4. mickeymouseclub

    mickeymouseclub Heavy Load Member

    886
    509
    Mar 17, 2017
    0
    Correct on that. It's a great place to be. Sometimes new things come along , and you have to adapt, work thru the growing pains.

    Glad to see these guys just coming aboard are doing well.
     
    Airborne, RStewart and HalpinUout Thank this.
  5. HalpinUout

    HalpinUout Road Train Member

    7,074
    18,158
    Oct 2, 2011
    0
    Just out of curiosity do any of you guys carry pipe stakes? I've only seen one load requiring them in a area I was in and it paid good...
     
  6. Highway Sailor

    Highway Sailor Road Train Member

    1,328
    1,658
    Nov 23, 2011
    Erie,Pa.
    0
    I carry 4. Had to turn down several loads in my area at the time when I did not have them.
     
    HalpinUout Thanks this.
  7. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,374
    Jul 16, 2012
    Bentonville Arkansas
    0
    Yes I picked up a set out of ok for under 50
     
    Airborne and HalpinUout Thank this.
  8. HalpinUout

    HalpinUout Road Train Member

    7,074
    18,158
    Oct 2, 2011
    0
    How many is a set 4? And where did you buy them? Also.... to hold them in the stake you use chain correct, they don't just sit in there right?
     
  9. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,374
    Jul 16, 2012
    Bentonville Arkansas
    0
    Yes 4 I got them from wheeler metals muskogee ok.
    You use 1 chain and binder pull them to each other and tighten them.
     
    HalpinUout Thanks this.
  10. mickeymouseclub

    mickeymouseclub Heavy Load Member

    886
    509
    Mar 17, 2017
    0
    I bought a section of channel iron 3 1/2 x 20 feet , cut into 4 and 1/2 foot sections , welded small angle iron on each side six inches from bottom, I hold em in with bungees , and will often run a chain from one to the other to keep them upright when loading
     
    HalpinUout Thanks this.
  11. TruckerPete1990

    TruckerPete1990 Road Train Member

    8,623
    5,374
    Jul 16, 2012
    Bentonville Arkansas
    0
    These are nice 6ft high thick pipe. It's rusted with one ended smashed in. Fits in the pockets perfect
     
    Airborne, RStewart and HalpinUout Thank this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.