New Tri-Pac installed...

Tuesday I installed the condenser on the back wall and hvac unit under the bed. its an old carrier comfort pro. I spent 3-4 hours to do it. Another 3-4 hours and I will have installed the engine box on frame with coolant lines connected to the DD15

 

Seems these unit should be a lot quieter for 12k.. Onan seems to have figured out how to make a quiet generator for rv’s.. seems everything in the trucking world is 10years behind the rest of the world..

 

Got my truck back today, they finished installing yesterday and was brought in on monday. Two day install. Mine costed me 13k total, ofc i had to get a loan and in a way i dont like the 3 knob crap i liked the other control panel. O well. This my first apu and truck.

 

??

They’re cheaping out and using worm drive clamps instead of spring clamps?

 

I like older Thermo King apus before Evolution.

 

Question, The manual states that the thermostat for heat only is not in the control unit on the sleeper wall. with my temp knob turned all the way to the left (down) the cabin temp is supposed to be around 50 degrees i believe. my cabin goes well up to high 70's at the west setting. so the thermostat must be someplace where its cold. any ideas?

thanks

 

Are you sure 500 rpm the old ones only run at 650 rpm how high are these new units running at?