And..... other than making some wiener feel important, the purpose that was supposed to serve was??![]()
The Truckers’ Report flatbed Hall of Shame.
Discussion in 'Flatbed Trucking Forum' started by MACK E-6, Dec 11, 2017.
Page 137 of 907
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
adayrider Thanks this.
-
PoleCrusher and Oxbow Thank this.
-
Is this a legit way to cross chain/secure rubberized equipment? Similar to @woody above's pics but different..
PoleCrusher Thanks this. -
HoneyBadger67, cke and scottied67 Thank this.
-
Definitely not OK. The giveaway is that the binder is not forming a straight line with the chain, to the attachment point on the vehicle. So the binders on both sides are dependent on each other, essentially pulling against one another. If the chain fails in any section it will compromise the tension on the other side.
I think that's a case of someone trying to be sharp. He thinks he's got a good way of securing with minimal equipment but he's putting himself in position to have a major "uh-oh"D.Tibbitt, LoneCowboy, TripleSix and 7 others Thank this. -
PoleCrusher, Tb0n3, MACK E-6 and 3 others Thank this.
-
Landincoldfire, HoneyBadger67, cke and 14 others Thank this.
-
I like the bent handles on the ratchet binders from using a cheater. Guy doesn’t have a clue.
cke, Feedman, scottied67 and 2 others Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 137 of 907