I went and pulled the picture of the upright boat up in photoshop. Measured the rims on the tractor (so 22.5") and used that to measure the height of the boat and got almost 32 foot.
The Truckers’ Report flatbed Hall of Shame.
Discussion in 'Flatbed Trucking Forum' started by MACK E-6, Dec 11, 2017.
Page 160 of 905
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
-
PoleCrusher and Oxbow Thank this.
-
I made a "block" 22.5" tall based on the number of pixels for the rim of the tractor. I pasted that block up from about the tires on the trailer (tallest part of the boat) 17 times. (17 * 22.5)/12 = 31.875 feet). Like I said it very well might not be accurate but the height measurement I got was less then 40' from the height of the boat I measured at....PoleCrusher and FlaSwampRat Thank this. -
That boat was perhaps 23-25 tall at the top of the flybridge, the roll axis CG is about the waterline.. The video show that boat swaying back and forth when it was going straight, the cradle was set at the keel not the chines.
SteveFeedman and FlaSwampRat Thank this. -
Just throw some bellies on it bro
-
-
I mean its not funny, but yeah. THAT'S FUNNY.D.Tibbitt, PoleCrusher, Feedman and 2 others Thank this. -
-
Interesting way to secure with chains.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 160 of 905