2020 Cascadia - Where in the heck do you hang the mic?

Discussion in 'CB Radio Forum' started by madmoneymike5, Jun 25, 2019.

  1. wolverine11

    wolverine11 Road Train Member

    1,629
    1,234
    Apr 1, 2015
    0
    A descrepancy of 3.9, thats quite alot, measuring with separate meter only ( no analyzer) the largest difference Ive seen is around .8, radio meter read 1.2, outside meter read 2.0. The most accurate radio swr meter that I have seen is the new Uniden 78ltd, it was in total agreement with outside meter, another meter that I found to be real accurate is the meter used by Galaxy, it requires no calibration, just switch to swr and key mic, I had a 929 and DX 45MP that both had the meter and both were pretty accurate. The new President Mckinley is pretty accurate too, just go to menu, select swr and radio automatically gives reading.
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. wolverine11

    wolverine11 Road Train Member

    1,629
    1,234
    Apr 1, 2015
    0
    2016
     
  4. wolverine11

    wolverine11 Road Train Member

    1,629
    1,234
    Apr 1, 2015
    0
    Just keep in mind that the single most important componant is the antenna system ( antenna and coax) as far as power is concerned it requires four times more power to make a significant increase in Tx range, so a basic radio ( like your 29) is probably 4 watt carrier, max pep 16 watts ( if amc is turned up to 100%) so the next increase would be to use a radio like the Stryker 655/955 that has a carrier of 16 watts and max pep if 64+ watts, you should be fine with cobra 29 but if there comes a time you want more range then setup seperate coax and antenna.
     
  5. that's exactly what I thought why not use a gear keeper think I'll just ignore this thread further
     
  6. scottied67

    scottied67 Road Train Member

    10,816
    12,615
    Mar 14, 2010
    california norte
    0
    CB install with phone help...

     
  7. madmoneymike5

    madmoneymike5 Medium Load Member

    633
    283
    Jan 30, 2010
    Arlington, TX
    0
    Not really sure then why you bothered to reply at all? Lol
     
    HoneyBadger67 and wolverine11 Thank this.
  8. Slowmover1

    Slowmover1 Road Train Member

    1,491
    1,209
    Oct 25, 2015
    Fort Worth
    0
    This. Sort of where I started.
     
  9. Brandt

    Brandt Road Train Member

    4,441
    6,028
    Sep 17, 2012
    0
    Here it was I got for 2020 Cascadia
    It's one of those little suction cup clip thing they sell at truck stops. Then you clip a CB Gear Keeper into that. I also have a Blue Tiger Bluetooth headset holder. They are flexible and you can bend them to hook around the plastic. So no drilling holes required to hold Blueparrott Head set. My CB is not all the way in the spot yet.
    IMG_20190629_074004843.jpg IMG_20190629_074015794.jpg IMG_20190629_074042472.jpg
     
    madmoneymike5 and wolverine11 Thank this.
  10. madmoneymike5

    madmoneymike5 Medium Load Member

    633
    283
    Jan 30, 2010
    Arlington, TX
    0
    Thanks for that Brandt. That's not a bad idea. I especially like the headset thing.

    What I've done is removed that screw in front the yellow light (what's that light for anyway?) and attempted to hang the microphone gear keeper there. However, the D-ring that comes with the gear keeper is too wide to fit in the slot where that screw is. I needed a smaller D-ring, but not so small that the screw eyelet wouldn't fit around the D-ring. My search started at my local hardware store but a lady representative of the hardware store mentioned trying a craft store (picture frames) when I came up empty at the hardware store. I called a Michael's Craft store and it turns out, they sell D-rings. The lady at the framing counter showed me to the jewelry making section for a keyring clip she personally uses for her keys. It happens to have what I believe will be the perfect sized D-ring. I haven't been back to my truck to try it, but I'm sure it will fit. I'll take a picture when I get back on Tuesday.
     
  11. craig_sez

    craig_sez Road Train Member

    5,564
    2,709
    Sep 5, 2013
    novascotia,Canada
    0
    Swr mete
    r doesnt matter if he ises stock plascadia ant..Cant tune nothin anyways...Most likly the swr will be fine but there are other #'s that will need attention which AGAIN cant be adjusted..
     
    Night Stalker10 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.