I'm wondering if the excess on the tongue flap might stay put better when it's folded up underneath if you try using some of those tarp clips and bungee it. I bought a 4 pack just before I switched to reefer and didn't get to play with them but the back flap was often a problem for me. It liked to unroll from where I'd hide it no matter the bungees used...
Advice needed please
Discussion in 'Flatbed Trucking Forum' started by Dave1837, Feb 12, 2021.
Page 2 of 2
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
You can p/u some 8ft 2 by 4 boards you see laying around loading yard and roll the flap at bottom around it and put a 2in strap over it to keep flapping down on both ends?
Dave1837 Thanks this. -
Fold it up. Put a piece of dunnage on it and strap the dunnage down. That's what I do
Dave1837 and Speed_Drums Thank this. -
-
A board or timber is the only solution I ever found. But at 1$ ea and 6 would fit in large coffee cup.... vs my 4x4x8' coil rack timber hoisted up there...Worth trying IMO
Attached Files:
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2 of 2