Steer axle wheel bearings

Call ALL STATES PETERBILT in St Paul,MN. They should help with part numbers, way better than RUSH.

 

So, you want part #'s but don't want to buy the part from them? Otherwise, why would you be asking them for the #. Peterbilt has an online parts counter you can register for.

 

"to get the correct parts elsewhere". When you ask for a part # they know this. Why would they spend the time looking something up for someone who is not going to buy from them? They are a business just like you. That was my point.

 

Competition.
Let’s reverse this.
How much are you quoting this make believe load for? 2200.

another calls knowing your bid so they bid 2150.

you’ve shown your cards instead of playing them close to your vest



But you can try a parts store that gets truck parts, bumper to bumper does truck parts here.

 

Colorado brake right down the road from Rush usually has all that stuff at a good price, I don't know if they can look up the part numbers though.

 

Yeah I never understood why I should be expected to tell someone how to do things or what parts to use when they clearly had no intention of using my services.
I don’t see why you can’t take it apart and then get bearings and seal based on the numbers that are stamped in them.
Just FYI John Deere is a good source of high quality bearings and usually very competitive in price for similar quality.

 

For the first part, you are under no obligation to

For the second, why is it so darned hard for any manufacturer to just give access to parts listings instead of only grudgingly ever telling the people that own things what parts are in it?
The answer is obviously that they want to force you to rely on THEM, not do it yourself.


But Whose bloody vehicle is it? Mine? Or the dealer/whoever pays exhorbitant sums for dealership access to "proprietary" info.

Yes it can be found by taking it apart, but from the time its taken apart, youre on a clock to get parts in and back together. Why is it a bad idea to try and have everything for the job ready when you start it rather than doing your parts runs in the middle of the job?