I have 2012 Pete with isx and fan stay on now before it's take little longer even on manual switch I checked when I turned off engine fan free both sides when u start engine it's making noise as well
Now it's stay on!whats wrong ??
Cummins isx fan stay on
Discussion in 'Peterbilt Forum' started by Hshappy2, May 13, 2017.
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Is your air pressure low? Typically they will run on high gear if you have low air pressure. Also if your A/C is running while your idling they tend to stay on for a long period of time. Thats just the way ISX has it programmed. Ive seen it on every model that has an ISX motor.
Hshappy2 Thanks this. -
There is a switch on the front end of the engine that is air actuated. If it fails fan stays on
Hshappy2 Thanks this. -
-
-
This could be your fan clutch worn out or, as stated, your A/C is turning it on. Sometimes the A/C pressure switches fail or the wiring shorts and causes the fan to run continuously or intermittently.
-
I replaced mine, thinking that it was wore out because it wobbles just a little bit. Turns out it's suppose to do that. $440 from the Pete shop. There's a air line off the fire wall above the engine that you could pull off and put some air to it. The fan clutch will pop back and forth if its OK. That's all I learned about it so far.
Hope this helps.Hshappy2 Thanks this. -
Fan clutch was bad so I replaced now working all good it's 550 dollars from peterbuilt dealer in Cali
77fib77 Thanks this. -
Mine was in NYC.
I can't figure labor as I had other things done with the clutch.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Related Categories
-
Tanks not equalizing
krazzyboi_44 posted Jan 23, 2026 -
Fifth wheel slide solenoid
Mdheavyhaul posted Jan 23, 2026 -
paccar mx13
Pstrucking112 posted Jan 19, 2026 -
Peterbilt headlights.
Perchie15 posted Jan 10, 2026 -
Light issues on 07 379
Kenny_24148 posted Nov 16, 2025 -
95 Peterbilt heater control
cke posted Oct 24, 2025 -
Whats that Pete?
tengelman posted Oct 21, 2025 -
Replacing MX with a 6NZ Cat
wally cash posted Sep 15, 2025 -
Peterbilt Cummins not regening
Perchie15 posted Aug 23, 2025 -
New to big trucks with my 1968...
crsracing posted Aug 15, 2025
Loading...
Recent Threads
-
International 9400I
LeviTrucker posted Jan 30, 2026 at 10:44 AM -
companies in WI that hire owner...
Brandonpdx posted Jan 30, 2026 at 10:07 AM -
Having issues with my 2005...
Eckhart posted Jan 30, 2026 at 9:36 AM -
Truck won’t start
Heric92 posted Jan 30, 2026 at 8:38 AM -
Recent CDL grad: roehl or swift...
cashondelivery410 posted Jan 30, 2026 at 3:11 AM -
Adding house batteries to a...
Seanp1226 posted Jan 29, 2026 at 11:33 PM -
Looking for guidance on bagging...
David white posted Jan 29, 2026 at 6:40 PM -
Looking for a team driver based...
Freddie23 posted Jan 29, 2026 at 5:48 PM -
Thinkin About Truckin Again
Stitch Horizon posted Jan 29, 2026 at 4:54 PM -
What Kind of Tech Do You Use?
Stitch Horizon posted Jan 29, 2026 at 4:39 PM
Loading...