I don't. I try not to put them directly above the tires, but even when I've had to, I've had no issues with them touching. I do have 4 2" straps and hand winches, but I seldomly use them
mercer transportation
Discussion in 'Mercer' started by kw12, Jul 21, 2012.
Page 2367 of 3685
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Come on in, the water's perfect.Airborne Thanks this.
-
Correct on that. It's a great place to be. Sometimes new things come along , and you have to adapt, work thru the growing pains.
Glad to see these guys just coming aboard are doing well.Airborne, RStewart and HalpinUout Thank this. -
Just out of curiosity do any of you guys carry pipe stakes? I've only seen one load requiring them in a area I was in and it paid good...
-
I carry 4. Had to turn down several loads in my area at the time when I did not have them.HalpinUout Thanks this.
-
Yes I picked up a set out of ok for under 50Airborne and HalpinUout Thank this.
-
How many is a set 4? And where did you buy them? Also.... to hold them in the stake you use chain correct, they don't just sit in there right?
-
Yes 4 I got them from wheeler metals muskogee ok.
You use 1 chain and binder pull them to each other and tighten them.HalpinUout Thanks this. -
I bought a section of channel iron 3 1/2 x 20 feet , cut into 4 and 1/2 foot sections , welded small angle iron on each side six inches from bottom, I hold em in with bungees , and will often run a chain from one to the other to keep them upright when loadingHalpinUout Thanks this.
-
These are nice 6ft high thick pipe. It's rusted with one ended smashed in. Fits in the pockets perfect
Airborne, RStewart and HalpinUout Thank this.
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 2367 of 3685