Landing gear on passenger side?

Discussion in 'Experienced Truckers' Advice' started by Dominick253, Aug 9, 2016.

  1. street beater

    street beater Road Train Member

    4,578
    20,669
    Apr 18, 2014
    cold as hell, MN
    0
    But leave it with no cogs, and hand write in sharpie "use other side" on both sides..
     
    Last edited: Aug 9, 2016
    scottied67 and BIGZILLA Thank this.
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. scottied67

    scottied67 Road Train Member

    10,826
    12,661
    Mar 14, 2010
    california norte
    0
    Also good to smear grease all over the crank handle and trailer door handles, you're doing the next driver a favor by moisturizing his hands.
     
  4. street beater

    street beater Road Train Member

    4,578
    20,669
    Apr 18, 2014
    cold as hell, MN
    0
    I have a can of white lithium grease spray, once in a while i tag a random drivers tire.... a day or 2 later i hear, "dont know what the hell i rubbed up against? I dont remember hitting any curbs with paint on em?" My response is, hmmm, was it there this morning? No? Yeahh some pre trip..... then i run, :)
     
  5. BIGZILLA

    BIGZILLA Heavy Load Member

    758
    1,318
    Oct 15, 2015
    Treasure coast, Florida
    0
    Do you know the small rolls of flagging tape surveyors use? it comes in many colors and I believe 250' rolls. it's the tape you see tied to the top of surveyors stakes. I take them and unroll them about 4 feet and tie them to the rear axle on a trailer and stack the remaining portion of the rolls on top of the axle. The more different colors the better. When they pull out the first bump they hit they fall and roll out and stream behind the trailer. The result looks like they are leading a gay pride parade.:eek:
     
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.