Magnum ltd - fargo, nd

Does it have a hole or a cut? I replaced a glad hand a while back because I had a cut right where the line connects to the fitting under the spring. Took 2 crescent wrenches and 30 min.

 

There is a chiropractor in Anoka, less than 10 miles from CR, only charged me $50 last year.

 

Dang...wish I'da known. Just did a 34 there and I need to renew mine b4 my next gig.

 

Smar@$$ or Dumb@$$, either way you're a butthead.

 

There is a chiropractor at the sapps brother in Denver that does them for 60. Going to do mine Monday

 

Yeah I have a hole right where the spring ends but mine is at the base where the hose connects to the truck

 

If you want TA to fix it, call the Tractor Shop after hours line and they will give you a tcheck.... just call before you get the work done... NOT after.... the TA will get authorization and then you call back with a total when it's done

 

So are the lines hooked up with a compression fitting? So I would just have to unscrew it cut the bad part of the line off and reattach?

 

That's how the gladhand end is. The TA shop in Albert Lea had the compression ferrel, I just couldn't get the fitting in the OEM gladhand to break loose with a crescent wrench, so I bought the new gladhand and cut the line with my cable seal cutters. A TA shop should be able to fix it fairly quick, once they can get you in the shop that is.

 

Hit some snow between KC and Emporia. It was snowing pretty hard, just not sticking. Well, not sticking to the road, it was sticking to my windshield, my mirrors and of course, sticking to my wingman sensor. It was right at 32°, so if it kept up after dark, there might be a white St. Patties day in their future (it's the 1st of 3 storms, so it might stick around that long). The Albert Lea area is expecting to be dumped on with the next round.of snow. Saw an early prediction (and already had a winter storm warning/watch this a.m. for Sunday and Monday...the forecasted snow storm total was 4-12")