Steam cleaning the under carriage?

Reefer shops steam clean reefer engines.

 

FWIW, I did mine myself at least once a year with Gunk Concentrate and a 2300 psi pressure washer. Pulled the steer onto 8" blocks, put on a "moonsuit", got on the creeper. It's a nasty,nasty job.

There at one time was a place near Ft. Wayne that did it. S & J Truck sales did a lot of frame stretches and sent the truck there prior to doing any work.

 

You could call a carpet cleaning company company that advertises truck mounted steam cleaning. Have them shoot some Chemeisters Grease Eraser on that stuff and then high pressure rinse it. If I still had my truck mount, I would hose it down and clean it off for you.

 

Call S&J Truck Sales. They're the guys that stretched my frame. They should be able to put you in contact with the steam cleaner outfit.
Might be a wild goose chase as this was back 10 yrs. ago. BOL

 

I have a set of ramps for my stepdeck and can do mine as often as I feel like it. Usually twice a year. I just set up the ramps as tall as they go and drive the steer tires right up to the top. Fire up the Hotsy and get to work. I can get most of it clean without even getting all the way under the truck.

I think it was @Lepton1 that knows a place in OKC that will do it for you for under $200.

 

I do on some of the trucks, I have a guy come in to use my Hotsy pressure washer in Indiana and have one here to do the trucks in the yard.

 

I’ve got a commercial grade hot water setup that will do it.

Flex wand is key, and as said - expect to trash a set of clothes doing it. NASTY.

I do it about twice a year.

The mechanic shop loves me for it.

 

OKC Truck Detail @ 5720 SW 11th Street. Make an appointment, they are busy. Weekdays only. I've used them three times in the last two years, as I buttoned up my engine. Money well spent.