Thermo King Precedent S-600 vs S-700

Discussion in 'Refrigerated Trucking Forum' started by Jacoooooooo, Jun 1, 2018.

  1. Buckeyes614

    Buckeyes614 Light Load Member

    133
    140
    Jan 22, 2014
    0
    Hey where did u buy ur divider? And does it actually help?
     
  2. Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  3. Buckeyes614

    Buckeyes614 Light Load Member

    133
    140
    Jan 22, 2014
    0
    My old carrier ultra xtc won't get below +8 on a 85degree ambient on a -10 setting, also as I was going thru the display I noticed that my discharge pressure was above 400psi, isn't that too high, i also checked the red ball on the side and they were both floating, the bottom ball was floating 65% and the top ball was floating 40%, any ideas on where to start?
     
  4. 062

    062 Road Train Member

    5,146
    12,887
    Oct 20, 2013
    0
    How long since the condenser was cleaned?
     
  5. Buckeyes614

    Buckeyes614 Light Load Member

    133
    140
    Jan 22, 2014
    0
    14 months ago
     
  6. abyliks

    abyliks Road Train Member

    1,907
    3,564
    May 2, 2010
    ludlow MA
    0
    Randall manufacturing, I have flaps in it too so I can put refrigerated on the tail for short distances as well and still get cold air back there. Helps a lot if your doors don’t seal that good,

    i was holding like -3 this week with all the 95+ degree weather,
     
    Jarhed1964 and Buckeyes614 Thank this.
  7. wichris

    wichris Road Train Member

    3,006
    4,324
    Jan 17, 2011
    0
    Precedent ERG is a simple fix. $100 sonic cleaner and an hour. Only need to buy new gaskets. TK says 5K hours but we just do it every service.
     
    Jarhed1964 and slow.rider Thank this.
  8. reeferwrencher

    reeferwrencher Medium Load Member

    480
    1,202
    Aug 4, 2018
    0
    Yeah too high.Leave the reefer running and wash the condenser coil for a good 15 minutes.If using a power washer dont bring the tip to close to the condensor as you might flatten the fins on it.
     
    Buckeyes614 Thanks this.
  • Truckers Report Jobs

    Trucking Jobs in 30 seconds

    Every month 400 people find a job with the help of TruckersReport.

  • Draft saved Draft deleted