one o the worst I can remember was when a box van I picked(swapped with other driver) up had 2 sheets of flat plate steel (53ft van) just lying no securement.,,qualcom tells me to load a dozen skids of plastic forms used for basement walls on top o the plate .twas winter time and slippery as kf went down everytime I pushed the skids to the back,,and the same when unloading at small building sites. believe me it never happened to me again ,the office was told I walk if I had that sht again
Your most pain in the ### freight
Discussion in 'LTL and Local Delivery Trucking Forum' started by Lrh502, Aug 24, 2017.
Page 15 of 16
-
-
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
-
Here is one. A 600 lbs pannel of glass. Liftgate delivery. Put it right next to my pallet jack so you have an idea of the dimensions.
It's up next. No idea how I am going to do it
motocross25, MACK E-6, Bob Dobalina and 1 other person Thank this. -
-
FreightlinerGuy, road_runner, MACK E-6 and 1 other person Thank this.
-
motocross25 and Cardfan89 Thank this.
-
Just saw the alerts on the thanks and quoted text. I never delivered it cause the guy wasn't there. Big wide and awkward, but only 6 inches thick. So easy to work around it.
Thanks guys for reminding me that i forgot to fill out an undelivered freight report. I'll hear about that tomorrow.motocross25 Thanks this. -
road_runner Thanks this.
-
Brilliant idea. Except we are swapping to elogs and I have to do a mandatory class in the AM.
motocross25 Thanks this. -
Four pallets of nail gun staples. Total weight 12,500 lbs. This is how they came in. Not strapped from loading terminal. Each box, weighed 50 lbs or so. Fortunately I did not have to deal with this. But large portions of this had to be repalletized. Took close to two hours of backbreaking work from my coworkers.
MACK E-6, Steel Dragon and Cardfan89 Thank this. -
Trucking Jobs in 30 seconds
Every month 400 people find a job with the help of TruckersReport.
Page 15 of 16